Monitor Interval - ZyXEL Communications Vantage CNM 2.3 User Manual

Chapter 24 3G Monitor

24.6.3 Monitor Interval

Use this screen to specify the time interval that the Vantage CNM accounts before
updating its reports.
Click Monitor > 3G Monitor > Monitor Setting > Monitor Interval. The
following screen displays.
Figure 284 Monitor > 3G Monitor > Monitor Setting > Monitor Interval
The following table describes the labels in this screen.
Table 235 Monitor > 3G Monitor > Monitor Setting > Monitor Interval
LABEL
Monitor Interval
Apply
Reset
526
DESCRIPTION
Specify the time interval when the Vantage CNM checks for
conditions. You can enter 0 if you want to disable this feature.
Enter a value from ten to sixty seconds.
Click this to save your settings.
Click this to change the settings in this screen to the last-saved
values.
Vantage CNM User's Guide