The Service Group Summary Screen - ZyXEL Communications Vantage CNM 2.3 User Manual

Chapter 14 Object
The following table describes the labels in this screen.
Table 152 Device Operation > Device Configuration > Object > Service > Service >
Add/Edit
LABEL
Name
IP Protocol
Starting Port
Ending Port
ICMP Type
IP Protocol
Number
Apply
Cancel

14.6 The Service Group Summary Screen

The Service Group summary screen provides a summary of all service groups. In
addition, this screen allows you to add, edit, and remove service groups.
376
DESCRIPTION
Type the name used to refer to the service. You may use 1-31
alphanumeric characters, underscores(
character cannot be a number. This value is case-sensitive.
Select the protocol the service uses. Choices are: TCP, UDP, ICMP, and
User Defined.
This field appears if the IP Protocol is TCP or UDP. Specify the port
number(s) used by this service. If you fill in one of these fields, the
service uses that port. If you fill in both fields, the service uses the range
of ports.
This field appears if the IP Protocol is ICMP Type.
Select the ICMP message used by this service. This field displays the
message text, not the message number.
This field appears if the IP Protocol is User Defined.
Enter the number of the next-level protocol (IP protocol). Allowed values
are 0 - 255.
Click Apply to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
), or dashes (-), but the first
_
Vantage CNM User's Guide