Address Add/Edit Screen - ZyXEL Communications Vantage CNM 2.3 User Manual

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

Chapter 14 Object

Table 147 Object > Address > Address (continued)

Total Records

14.4.1 Address Add/Edit Screen

The Address Add/Edit screen allows you to create a new address or edit an

existing one. To access this screen, go to the Address screen (see

Figure 165 Device Operation > Device Configuration > Object > Address > Address

This field displays the IP addresses represented by each address object.

If the object's settings are based on one of the ZyWALL's interfaces, the

name of the interface displays first followed by the object's current

address settings.

This column provides icons to add, edit, and remove addresses.

To add an address, click the Add icon at the top of the column. The

Address Add/Edit screen appears.

To edit an address, click the Edit icon next to the address. The Address

Add/Edit screen appears.

To delete an address, click on the Remove icon next to the address. The

Web Configurator confirms that you want to delete the address before

This field displays the total number of address entries.

369), and click either the Add icon or an Edit icon.

Section 14.4

Vantage CNM User's Guide