Vantage CNM 2.0
•
If the selected device does not have a certain configuration, DMZ or wireless for example, then DMZ or
WLAN will appear grayed out in the Configuration menu list. If this happens and you cannot access the
last click menu, then you will be redirected to Device > Status page by default.
•
If you click an administrator icon in the object tree, the System > Administrators menus will appear.
Device
Configuration
Status
Select Device BB
Registration
General
Synchronize
LAN
Firmware Mgmt
WLAN
Firmware Upgrade
DMZ
Configuration File
WAN
NAT
Static route
VPN
Firewall
Device Log
ADSL Monitor
Device Alarm
2.3.4 Procedure For Configuring A Device
The default when you first enter Vantage is the root node in the object tree and Device >Status menu.
1.
Select a device in the object pane.
2.
Select an item from a drop-down menu (Device, Configuration, Building Block, System or Monitor). If
the selected device does not have a certain configuration, DMZ or wireless for example, then DMZ or
WLAN will appear grayed out in the Configuration menu list.
3.
That menu for the selected device then appears in the Content pane.
Context-Sensitive Menus
Some context-sensitive menus appear with the words "Java Applet Window" as follows:
2-6
You can only configure a single device at one time.
Table 2-1Menus Overview
Building Block
Device BB
Configuration BB
Component BB
System
Monitor
Administrators
Alarm
Status
Firmware Report
Upgrade
Status Monitor
License
VPN Editor
Preferences
Maintenance
Address Book
Certificate Mgmt
Logs
About
Logout
Logout
GUI Introduction