Menu Bar - ZyXEL Communications Vantage CNM 2.3 User Manual

Chapter 2 GUI Introduction
Device window: Displays the devices that are managed by the Vantage CNM.
3
You can also configure and view the logical groupings of the managed devices.
This is also known as OTV (Object Tree View).
Navigation panel: Displays the navigation links that you use to access
4
configuration, log or status screens.
Configuration window: Displays the configuration screens that you set for
5
Vantage CNM or a selected device.
Note: For security reasons, Vantage CNM automatically times out after fifteen minutes
of inactivity. Log in again if this happens.
Each part is discussed in more detail in the following sections.

2.1 Menu Bar

The following table describes the icons in the menu bar.
Table 1 Menu Bar Icon Description
ICON
26
DESCRIPTION
Click this icon to display the navigation links to screens that allow you to
configure, manage firmware or license for a selected device.
Click this icon to display the navigation links to screens that allow you to
manage VPN tunnels among ZyWALL devices and provide diagnostics for fail
tunnels.
Click this icon to display the navigation links to screens that allow you to
check device status, ZLD ZyWALL Device HA status and device alarm.
Click this icon to display the navigation links to screens that allow you to
view device operation reports, CNM logs and device associated Vantage
reports on Vantage Report server.
Click this icon to display the navigation links to screens that allow you to
configure/backup/restore the Vantage CNM system settings, upgrade
Vantage CNM software version and license and view the current software
informatoin.
Click this icon to display the navigation links to screens that allow you to
manage system group and account.
Click this icon to open the help page for the current screen in Vantage CNM.
Click this icon to open a screen that displays the version of Vantage CNM.
Click this icon to log out of Vantage CNM.
Vantage CNM User's Guide