The Trunk Member List Screen - ZyXEL Communications Vantage CNM 2.3 User Manual

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

9.8.1 The Trunk Member List Screen

Use this screen to add or remove interface(s) into or from the selected trunk. Click

the Add icon in the Device Operation > Device Configuration > Network >

Interface > Trunk > Edit sreen to open the following screen.

Figure 131 Device Operation > Device Configuration > Network > Interface > Trunk

> Edit > Add

Each field is described in the table below.

Table 116 Device Operation > Device Configuration > Network > Interface > Trunk >

Vantage CNM User's Guide

This field displays Ethernet interfaces and VLAN interfaces that can

become part of the bridge interface. An interface is not available in the

following situations:

There is a virtual interface on top of it

It is already used in a different bridge interface

Select one, and click the select arrow to add it to the bridge interface.

Each bridge interface can only have one VLAN interface.

This field displays the interfaces that are part of the bridge interface.

Select one, and click the deselect arrow to remove it from the bridge

Click Apply to save your changes back to the ZyWALL.

Click Cancel to exit this screen without saving.

Chapter 9 Device Network Settings