Wlan General - ZyXEL Communications Vantage CNM 2.3 User Manual

Centralized network management
Hide thumbs Also See for Vantage CNM 2.3:
Table of Contents

Advertisement

Chapter 9 Device Network Settings
Table 98 Device Operation > Device Configuration > Network > Interface > Ethernet
> Add (continued)
LABEL
Interface
Name
Description
IP Address Assignment
IP Address
Subnet Mask
Gateway
Metric
Interface Parameters
Upstream
Bandwidth
Downstream
Bandwidth
Apply
Cancel

9.2 WLAN General

Use this screen to configure basic settings for a wireless network. To open this
screen, click Device Operation > Device Configuration > Network >
Interface > WLAN > General.
256
DESCRIPTION
This field is read-only. It displays the name of the virtual interface,
which is automatically derived from the underlying Ethernet interface,
VLAN interface, or bridge interface.
Enter a description of this interface. It is not used elsewhere. You can
use alphanumeric and
()+/:=?!*#@$_%-
up to 60 characters long.
Enter the IP address for this interface.
Enter the subnet mask of this interface in dot decimal notation. The
subnet mask indicates what part of the IP address is the same for all
computers in the network.
This field is not available for all ZyWALL models. Enter the IP address
of the gateway. The ZyWALL sends packets to the gateway when it
does not know how to route the packet to its destination. The
gateway should be on the same network as the interface.
Enter the priority of the gateway (the ISP) on this interface. The
ZyWALL decides which gateway to use based on this priority. The
lower the number, the higher the priority. If two or more gateways
have the same priority, the ZyWALL uses the one that was configured
first.
Enter the maximum amount of traffic, in kilobits per second, the
ZyWALL can send through the interface to the network. Allowed
values are 0 - 1048576.
This is reserved for future use.
Enter the maximum amount of traffic, in kilobits per second, the
ZyWALL can receive from the network through the interface. Allowed
values are 0 - 1048576.
Click Apply to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving.
characters, and it can be
Vantage CNM User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vantage cnm

Table of Contents