ZyXEL Communications Vantage CNM 2.3 User Manual page 488

Chapter 22 VPN Monitor
In this example, the ZW35-TW's VPN is triggered manually. Then you can see
both two devices' logs and finally they establish the VPN tunnel successfully.
Figure 254 VPN Management > VPN Monitor > By Community > Show Detail >
Diagnostic > Logs
The following table describes the fields in this screen.
Table 216 VPN Management > VPN Monitor > By Community > Show Detail >
Diagnostic > Logs
LABEL
Hide Cookie Log
Message
Device Name:
Time
Message
Source
Destination
Category
488
DESCRIPTION
Select this to hide the IKE cookie logs.
This field displays the device name for the following logs section.
This field displays the time the log was recorded.
This field states the reason for the log. Refer to the device User's
Guide for log message descriptions and the device CLI Reference
Guide for details on using the command line interpreter to display
logs.
This field lists the source IP address and the port number of the
incoming packet.
This field lists the destination IP address and the port number of
the incoming packet.
This displays the category type of the logs.
Vantage CNM User's Guide