Chapter 4 Configuration
4.5 Default Performance Monitor Library
Click Configuration > Performance Monitor Library to open the Default Monitor Library
screen. Use this screen to view the default performance monitors that you can use in the Tool >
Performance Monitoring screens (see
Figure 82 Configuration > Performance Monitor Library > Default Monitor Library
Each field is described in the following table.
Table 38 Configuration > Performance Monitor Library > Default Monitor Library
LABEL
Name
MIB Node
Description
4.5.1 Customized Performance Monitor Library
Click Configuration > Performance Monitor Library > Customized Monitor Library to open
the Default Monitor Library screen. Use this screen to configure more performance monitors that
you can use in the Tool > Performance Monitoring screens (see
Figure 83 Configuration > Performance Monitor Library > Customized Monitor Library
Each field is described in the following table.
Table 39 Configuration > Performance Monitor Library > Customized Monitor Library
LABEL
Add
Edit
Remove
check box
Name
120
DESCRIPTION
This field displays the name of a performance monitor.
This field displays the MIB node(s) this monitor uses.
This field displays additional information for the monitor.
DESCRIPTION
Click this to create a performance monitor.
Select a performance monitor and click this to modify it.
Select one or more performance monitors and click this to remove them.
Select the check box of one or more entries and click Edit or Remove to take the
action for the entries respectively. Select or clear the check box at the table heading
line to select or clear all check boxes in this column.
This field displays the name of a configured performance monitor.
Section 6.8 on page
161).
Section 6.8 on page
161).
ENC User's Guide