Vantage Cnm Server Public Ip Address - ZyXEL Communications Vantage CNM 2.3 User Manual
Centralized network management
Hide thumbs
Also See for Vantage CNM 2.3:
- Upgrade information (16 pages) ,
- Quick start manual (127 pages)
Table of Contents
Advertisement
Table 250 CNM System Setting > Configuration > Servers > Configuration
LABEL
Internal IP or
Domain Name
User Name
Password
Mail Server
IP or Domain Name Type the IP address or the domain name of the mail server here.
Mail Sender
User Name
Password
Apply
Reset
30.1.1 Vantage CNM Server Public IP Address
If you change the Vantage CNM server public IP address, then each (Vantage
CNM-registered) device's Manager IP address must change too.
Go to the CNM System Settings > Configuration > Servers > Configuration
1
screen.
Enter the new IP address in the Public IP Address field and Apply.
2
Change all registered devices' manager IP address to the new IP address, you
3
must access each device's web interface or command line.
• For ZyNOS ZyWALL, go to ADVANCED > REMOTE MGMT > CNM tab in the
web interface. Enter the new Vantage CNM public IP address and then click
Apply.
• For ZLD ZyWALL, go to System > Vantage CNM in the web interface. Enter
the new Vantage CNM public IP address and then click Apply.
• For Prestige, go to command line and
device where x.x.x.x is the public IP address of the Vantage CNM server.
Restart managed devices or restart Vantage CNM (see
4
communication between Vantage CNM and devices. Wait about 5 minutes until the
device is ready and registers with Vantage CNM. You don't have to restart the
computer on which Vantage CNM is installed. See how to restart Vantage CNM as
following.
Vantage CNM User's Guide
DESCRIPTION
If your FTP server is in the same private network as the Vantage
CNM server, select this and type the IP address or domain name
of the FTP server. Vantage CNM will then use this IP address for
uploading firmware files to managed devices.
Type your login name to this FTP server.
Type the FTP server password associated with the login name.
The mail (SMTP) server is used to send Vantage CNM
notifications.
Type a name to identify the mail server.
Type your login name to this mail server.
Type the mail server password associated with the login name.
Click this to save your settings in Vantage CNM.
Click this to begin configuring the screen afresh.
enter cnm managerIp x.x.x.x on the ZyXEL
Chapter 30 CNM System Setting
4a
and 4b) to reset the
563
Advertisement
Table of Contents
Troubleshooting
