Ipsec Vpn Connection Add/Edit (Manual Key) - ZyXEL Communications Vantage CNM 2.3 User Manual

Table 130 Device Operation > Device Configuration > VPN > IPSec VPN > VPN
Connection > Add/Edit (IKE) (continued)
LABEL
SNAT
Destination
NAT
#
Original IP
Mapped IP
Protocol
Original Port
Mapped Port
Add icon
Total Records
Apply
Cancel

11.1.2 IPSec VPN Connection Add/Edit (Manual Key)

If you want to use a manual key instead of an IKE key, select manual key in the
VPN Connection Add/Edit screen. This is useful if you have problems with IKE
key management.
Vantage CNM User's Guide
DESCRIPTION
Select the address object that represents the translated source
address (or select Create Object to configure a new one). This is the
address that hides the original source address. The size of the original
source address range (Source) must be equal to the size of the
translated source address range (SNAT).
This translation forwards packets (for example, mail) from the remote
network to a specific computer (for example, the mail server) in the
local network.
This field is a sequential value, and it is not associated with a specific
NAT record. However, the order of records is the sequence in which
conditions are checked and executed.
Select the address object that represents the original destination
address. This is the address object for the remote network.
Select the address object that represents the desired destination
address. For example, this is the address object for the mail server.
Select the protocol required to use this translation. Choices are: TCP,
UDP, or All.
These fields are available if the protocol is TCP or UDP. Enter the
original destination port or range of original destination ports. The
size of the original port range must be the same size as the size of
the mapped port range.
These fields are available if the protocol is TCP or UDP. Enter the
translated destination port or range of translated destination ports.
The size of the original port range must be the same size as the size
of the mapped port range.
This column contains icons to add, move, and remove NAT records.
To add a NAT record, click the Add icon at the top of the column.
To move a NAT record, click the Move to N icon next to the record,
and then type the row number to which you want to move it. The
records are renumbered automatically.
To remove a NAT record, click the Remove icon next to the record.
The Vantage CNM confirms that you want to delete the NAT record
before doing so.
This field displays the total number of NAT records in the table.
Click Apply to save the changes.
Click Cancel to discard all changes and return to the main VPN
screen.
Chapter 11 IPSec VPN
331