Address Mapping - ZyXEL Communications Vantage CNM 2.3 User Manual

Table 80 Device Operation > Device Configuration > Advanced > NAT > Port
Fowarding (continued)
LABEL
Port
Translation
(start/end)
Server IP
Address
Apply
Reset

7.3 Address Mapping

Use this screen to configure various types of network address translation (NAT) on
the device. To open this screen, click a device, click Device Operation in the
menu bar, and then click Device Configuration > Advanced > NAT > Address
Mapping in the navigation panel.
Figure 88 Device Operation > Device Configuration > Advanced > NAT > Address
Mapping
The following table describes the labels in this screen.
Table 81 Device Operation > Device Configuration > Advanced > NAT > Address
Mapping
LABEL
WAN
Interface
#
Vantage CNM User's Guide
DESCRIPTION
Enter the port number here to which you want the device to translate the
incoming port. For a range of ports, you only need to enter the first
number of the range to which you want the incoming ports translated,
the device automatically calculates the last port of the translated port
range.
Type the IP address of the inside server.
Click this to save your changes back to the device.
Click this to begin configuring this screen afresh.
DESCRIPTION
Select the WAN port to use the address mapping rules.
This is the number of an individual entry.
Chapter 7 Device Advanced Settings
219