Chapter 5 Device Network Settings
Table 27 Device Operation > Device Configuration > Network > WAN > Dial Backup
> Advanced (ZyNOS ZyWALL) (continued)
LABEL
Dial Timeout
(sec)
Retry Count
Retry Interval
(sec)
Drop Timeout
(sec)
Call Back Delay
(sec)
Back
Apply
5.3.6 Edit Dial Backup (ZyNOS ZyWALL)
Click Edit in the TCP/IP Options field in the screen shown in
96
to display the next screen.4
Figure 42 Device Operation > Device Configuration > Network > WAN > Dial
Backup > Edit (ZyNOS ZyWALL)
100
DESCRIPTION
Type a number of seconds for the device to try to set up
an outgoing call before timing out (stopping).
Type a number of times for the device to retry a busy or
no-answer phone number before blacklisting the number.
Type a number of seconds for the device to wait before
trying another call after a call has failed. This applies
before a phone number is blacklisted.
Type the number of seconds for the device to wait before
dropping the DTR signal if it does not receive a positive
disconnect confirmation.
Type a number of seconds for the device to wait between
dropping a callback request call and dialing the
corresponding callback call.
Click this to return to the previous screen.
Click this to save your changes back to the device.
EXAMPLE
60
0
10
20
15
Figure 40 on page
Vantage CNM User's Guide