Chapter 30 CNM System Setting
Setting in the menu bar and then click Configuration > User Access in the
navigation panel.
Figure 307 CNM System Setting > Configuration > User Access
The following table describes the fields in this screen.
Table 252 CNM System Setting > Configuration > User Access
LABEL
Maximum Concurrent
Users
Idle Timeout
Maximum Retry Count
Lockout Period
Users Change
Password Period
Apply
Reset
30.4 Notifications
Use this screen to decide who should receive e-mail for events that may warrant
immediate attention such as firmware upgrade or device logs and/or alarms.
Device Owner is a variable that refers to the e-mail address of the device owner
(configured in the Device Owner screen).
566
DESCRIPTION
Type the maximum number of administrators allowed to log into
Vantage CNM at any one time.
Select the check box next to this to activate the timeout, and
type the length of time an Administrator can leave the Vantage
CNM web configurator idle before he is automatically logged out.
Clear the check box to disable the timeout.
Type the number of times an incorrect password may be entered
before a login failure is returned.
Type the wait time before allowing another login in after a login
failure is returned.
Type how often all Administrators must change their Vantage
CNM login passwords. If an Administrator does not change her
password within this time, then the old password expires.
Click this to save your settings in Vantage CNM.
Click this to begin configuring the screen afresh.
Vantage CNM User's Guide