The Service Group Add/Edit Screen - ZyXEL Communications Vantage CNM 2.3 User Manual

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

Chapter 14 Object

14.6.1 The Service Group Add/Edit Screen

The Service Group Add/Edit screen allows you to create a new service group or

edit an existing one. To access this screen, go to the Service Group screen (see

Section 14.6 on page

Figure 171 Device Operation > Device Configuration > Object > Service > Service

Group > Add/Edit

The following table describes the labels in this screen.

Table 154 Device Operation > Device Configuration > Object > Service > Service

Group > Edit

376), and click either the Add icon or an Edit icon.

Enter the name of the service group. You may use 1-31 alphanumeric

characters, underscores(

be a number. This value is case-sensitive.

Enter a description of the service group, if any. You can use up to 60

printable ASCII characters.

This field displays the names of the service and service group objects

that can be added to the service group.

Select service and service group objects that you want to be members of

this group and click the right arrow to add them to the member list.

This field displays the names of the service and service group objects

that have been added to the service group. The order of members is not

important. To remove members, select them and click the left arrow.

Click Apply to save your changes back to the ZyWALL.

Click Cancel to exit this screen without saving your changes.

), or dashes (-), but the first character cannot

Vantage CNM User's Guide