Dns; Address Record - ZyXEL Communications Vantage CNM 2.3 User Manual

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

Table 86 Device Operation > Device Configuration > Advanced > Static Route > Edit

7.7 DNS

This section shows you how to configure the DNS screens. These screens may

vary depending on which model you're configuring. Please see the device's User's

Guide for more information about any of these screens or fields.

Use this screen to map a fully-qualified domain name (FQDN) to an IP address. To

open this screen, click a device, click Device Operation in the menu bar and then

click Device Configuration > Advanced > DNS > Address Record in the

navigation panel.

Figure 94 Device Operation > Device Configuration > Advanced > DNS > Address

The following table describes the labels in this screen.

Table 87 Device Operation > Device Configuration > Advanced > DNS > Address

Vantage CNM User's Guide

This parameter determines if the device will include this route to a

remote node in its RIP broadcasts.

Select this check box to keep this route private and not included in RIP

broadcasts. Clear this check box to propagate this route to other hosts

through RIP broadcasts.

Click this to save your changes back to the device.

Click this to return to the previous screen.

This is the number of an individual entry.

This is a host's fully qualified domain name.

Chapter 7 Device Advanced Settings