Dhcp - ZyXEL Communications Vantage CNM 2.3 User Manual

Table 92 Device Operation > Device Configuration > Advanced > DNS > DDNS
LABEL
Apply
Reset

7.12 DHCP

Use this screen to configure the DNS server information that the device sends to
DHCP clients on the LAN, DMZ or WLAN. To open this screen, click a device, click
Device Operation in the menu bar and then click Device Configuration >
Advanced > DNS > DHCP in the navigation panel.
Figure 100 Device Operation > Device Configuration > Advanced > DNS > DHCP
The following table describes the labels in this screen.
Table 93 Device Operation > Device Configuration > Advanced > DNS > DHCP
LABEL
DNS Servers
Assigned by DHCP
Server
Selected Interface Select an interface from the drop-down list box to configure the DNS
#
DNS
Vantage CNM User's Guide
DESCRIPTION
Click this to save your changes back to the device.
Click this to begin configuring this screen afresh.
DESCRIPTION
The device passes a DNS (Domain Name System) server IP address
to the DHCP clients.
servers for the specified interface.
This is the number of an individual entry.
These read-only labels represent the DNS servers.
Chapter 7 Device Advanced Settings
235