Aaa; Configuring Active Directory Or Ldap Default Server Settings; Chapter 15 Aaa - ZyXEL Communications Vantage CNM 2.3 User Manual

C
H A P T E R
15.1 Configuring Active Directory or LDAP
Default Server Settings
Use this screen to configure the Active Directory or LDAP default server settings.
To access this screen, click Device Operation > Device Configuration >
Object > AAA Server > Active Directory (or LDAP).
Figure 175 Device Operation > Device Configuration > Object > AAA Server >
Active Directory (or LDAP) > Default
The following table describes the labels in this screen.
Table 158 Device Operation > Device Configuration > Object > AAA Server > Active
Directory (or LDAP) > Default
LABEL
Host
Port
Vantage CNM User's Guide
DESCRIPTION
Enter the IP address (in dotted decimal notation) or the fully-qualified
domain name (up to 63 alphanumerical characters) of an AD or LDAP
server.
Specify the port number on the AD or LDAP server to which the ZyWALL
sends authentication requests. Enter a number between 1 and 65535.
The default is 389.
15

AAA

385