Chapter 3 The Web Configurator
Table 6 Device Window
SECTION
3
4
When you add a device to Vantage Report, you can specify the name, MAC address, type, and
any notes for the device. When you click on the device, this information is displayed in the
report window (see
edit the name and the notes. If you want to update the MAC address or device type, you have
to delete the current device and add it again. These screens are discussed in more detail
together in
Figure 5 Add/Edit Device and Add/Edit Folder Screens
42
DESCRIPTION
To move a device in the device window tree
•
right-click on the device, and select Cut it. Then right-click the destination folder and
select Paste to.
To select which device is included in a report
•
click on the device.
To look at the basic information about a device,
•
click on the device. The Device Information screen appears in the report window.
(See
Figure
5.)
To edit the basic information about a device,
•
right-click on the device, and select Edit Device. The Edit Device screen appears in
the device window. (See
To edit the basic information about a folder,
•
right-click on the folder, and select Edit Folder. The Edit Folder screen appears in
the device window. (See
To remove a device from Vantage Report,
•
right-click on the device, and select Delete Device. Vantage Report confirms you
want to delete it before doing so.
To remove a folder from Vantage Report,
•
right-click on the folder, and select Delete Folder. Vantage Report confirms you want
to delete it before doing so.
To search for a device,
•
type any part of the name, MAC address, or note in the SEARCH field, and click the
magnifying glass. If a match is found, Vantage Report highlights the device in the
device window, but the report window does not change. If a match is not found, you
get a message. You can click the magnifying glass again to look for another match.
Section 3.6.1 on page
Figure 5 on page
42.
Figure
5.)
Figure
5.)
52). When you edit a device, however, you can only
Vantage Report User's Guide