Template Add/Edit; Logo Template - ZyXEL Communications VANTAGE REPORT Manual

Hide thumbs Also See for VANTAGE REPORT:

Table of Contents

Chapter 11 Schedule Report

11.6 Template Add/Edit

Use this screen to customize a scheduled report template for a particular ZyXEL

To access this screen, click Add in the Report > Schedule Report > Configure

Template screen.

Figure 178 Report > Schedule Report > Configure Template > Add

Each field is described in the following table.

Table 166 Report > Schedule Report > Configure Template > Add

Use this screen to see the list of existing logo templates.

Enter a name to identify the template inside Vantage Report.

Numbers (0-9), letters (a-zA-Z), periods (.) and the underscore (_)

are allowed. Spaces are not allowed. The name must start with a

number or letter. Use up to 28 characters.

Select the ZyXEL Device you would like to associate with the

scheduled report template.

Write a short description to idenity the scheduled report template.

Select which report(s) you want to generate and send in the e-mail

message. For some reports, you can select additional options. All the

bandwidth reports use the same direction setting.

Use the Select All check box at the bottom to select every report.

Figure 174 on page 386

Click this to save your settings and close the screen.

Click this to change the settings in this screen to the last-saved

Click this to close the screen without saving any changes.

for the full view of Report List.

Vantage Report User's Guide