Installing Drive Enclosures; Installation Rules For Drive Enclosures; Installable Drive Enclosures; Drive Enclosure Handling Instructions - Fujitsu ETERNUS DX80 S2 User Manual

Chapter 5 Maintaining Optional Products

5.2 Installing Drive Enclosures

5.2 Installing Drive Enclosures
Optional drive enclosures can be installed while the ETERNUS DX Disk storage system is running without
affecting the system.
This section explains how to install optional drive enclosures.
CAUTION
5.2.1

Installation Rules for Drive Enclosures

Up to nine drive enclosures can be installed in the ETERNUS DX Disk storage system. 3.5" type drive enclosures
and 2.5" type drive enclosures can be installed in the ETERNUS DX Disk storage system together.
In this case, the maximum number of drives allowed determines the maximum number of drive enclosures
that may be installed.
5.2.2

Installable Drive Enclosures

For installable drive enclosures, refer to "Product List".
5.2.3

Drive Enclosure Handling Instructions

■ About condensation
CAUTION
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Do Not
• Do not uninstall or move a drive enclosure that is already installed.
Contact your sales representative or maintenance engineer if a drive enclosure
needs to be uninstalled or moved.
Do
• When moving a drive enclosure from a cold place, such as an un-conditioned
store house in winter, to a warmer place such as an air-conditioned room, the
severe temperature change may result in condensation forming.
To avoid this, allow the packed drive enclosure sufficient time in the warmer
place (one hour for each 15°C of temperature difference) to adapt to the new
temperature.
72
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0