Installing Additional Drive Enclosures - Fujitsu ETERNUS AF250 S2 Basic Operation Manual

5. Component Expansion/Function Enhancement

Installing Additional Drive Enclosures

(3)
Swing the lock lever in the direction of the arrow, until the lock clicks shut.
(4)
Check that the newly installed drive's DRIVE READY LED lights up green.
5
To install more additional drives, repeat
6
If a wrist strap is used, remove the wrist strap.
7
In the [Drives] screen of [Component] on the ETERNUS Web GUI screen, check that the added drives have
been recognized.
8
Set up RAID groups, volumes, hot spares, and host affinity settings, as required.
Installing Additional Drive Enclosures
Drive enclosures can be installed while the ETERNUS AF is running without affecting the system.
This section explains how to install drive enclosures in the ETERNUS AF.
Hold the drive with both hands to protect against jarring.
•
Step 3
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
Lock lever
and Step 4.
51
P3AG-1842-06ENZ0