Chapter 5 Maintaining Optional Products; Installing Drives - Fujitsu ETERNUS DX80 S2 User Manual

Chapter 5
Maintaining Optional Products
The following optional products can be installed in the ETERNUS DX Disk storage system:
• Drives
• Drive enclosures
• Host interfaces
• Long wave SFP+ modules
This chapter explains the installation rules, handling instructions, and installation procedures for these
optional products.
Disks, drive enclosures, and Long wave SFP+ modules can be added by users. Users can also replace Short
wave SFP+ modules with Long wave SFP+ modules.
However, make sure to read the manual that contains the safety precautions before performing any of these
procedures.
5.1

Installing Drives

Optional drives can be installed while the ETERNUS DX Disk storage system is running without affecting the
system.
This section explains how to install optional drives.
CAUTION
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Do Not
• Do not uninstall or move a drive that is already installed.
Contact your sales representative or maintenance engineer if a drive needs to
be uninstalled or moved.
64
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0