Specifications For Optional Power Supply Products; Table 8 Specifications For Ac200V Power Cords (For The Emeia, Central American, And Caribbean Regions); Table 9 Specifications For Ac200V Power Cords (For Regions Other Than The Emeia, Central American, And Caribbean Regions) - Fujitsu ETERNUS DX8100 S4 Site Planning Manual

Hybrid storage systems
Table of Contents

Advertisement

1. ETERNUS DX Installation
Outlet/Socket Specifications

Specifications for Optional Power Supply Products

This section explains the specifications of optional power cords and power related optional products.
When using power distribution units, take the number of outlets required to connect each enclosure into
consideration to select the most appropriate power distribution units.
When an existing power socket is used, make sure that the plug type of the power distribution unit fits the
existing power socket and that the power supply facility is able to provide sufficient power to the system. If the
plug type does not fit the power socket, electrical work to change the power socket is required. This electrical
work must be performed in compliance with the electrical codes of the nation, the municipality, or the region.
AC200V Power Cords (for the EMEIA, Central American, and Caribbean Regions)
AC200V power cords are used to connect devices to the IEC60320 C13 power socket type. These power cords can
be used if the specifications of the connection device allow AC200V.
Table 8
Specifications for AC200V Power Cords (for the EMEIA, Central American, and Caribbean Regions)
Usage
Used for connection
between the ETERNUS DX
and the socket (IEC60320
C13 n IEC60320 C14G)
AC200V Power Cords (for Regions other than the EMEIA, Central American, and Caribbean
Regions)
AC200V power cords are used to connect devices to the NEMA L6-15R power socket type. These power cords can
be used if the specifications of the connection device allow AC200V.
Table 9
Specifications for AC200V Power Cords (for Regions other than the EMEIA, Central American, and
Caribbean Regions)
Usage
Used for connection
between the ETERNUS DX
and the socket
(IEC60320 C13 n NEMA
L6-15P)
Socket type
Plug type
(Socket)
IEC60320 C14G
IEC60320 C13
Socket type
Plug type
(Socket)
NEMA L6-15P
NEMA L6-15R
35
Voltage rating/current
Cable length
rating
3.0m
250V 10A
Voltage rating/current
Power cord length
rating
4.0m
Rating: 250V 10A
(Normal usage rating:
8A)
Site Planning Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus dx8900 s4

Table of Contents