Specifications For Optional Power Supply Products; Table 11 Specifications For Ac200V Power Cords (For The Emeia, Central American, And Caribbean Regions); Table 12 Specifications For Ac200V Power Cords (For Regions Other Than The Emeia, Central American, And Carib- Bean Regions) - Fujitsu ETERNUS DX8100 S3 Site Planning Manual

1. ETERNUS DX Installation
Outlet/Socket Specifications

Specifications for Optional Power Supply Products

This section explains the specifications of optional power cords and power related optional products.
For power distribution units, the number of outlets that are required to connect the frontend enclosure, control-
ler enclosures, and drive enclosures should be taken into consideration, and the most appropriate power distri-
bution units should then be selected.
When an existing power socket is used, make sure that the plug type of the power distribution unit fits the exist-
ing power socket and that the power supply facility is able to provide sufficient power to the system. If the plug
type does not fit the power socket, electrical work to change the power socket is required. This electrical work
must be performed in compliance with the electrical codes of the nation, the municipality, or the region.
■
AC200V Power Cords (for the EMEIA, Central American, and Caribbean Regions)
AC200V power cords are used to connect devices to the IEC60320 C13 power socket type. These power cords can
be used if the specifications of the connection device allow AC200V.

Table 11 Specifications for AC200V Power Cords (for the EMEIA, Central American, and Caribbean Regions)

Usage
Used for connection be-
tween the ETERNUS DX
and the socket
(IEC60320 C13 n
IEC60320 C14G)
■
AC200V Power Cords (for Regions other than the EMEIA, Central American, and Caribbean
Regions)
AC200V power cords are used to connect devices to the NEMA L6-15R power socket type. These power cords can
be used if the specifications of the connection device allow AC200V.
Table 12 Specifications for AC200V Power Cords (for Regions other than the EMEIA, Central American, and Carib-
bean Regions)
Usage
Used for connection be-
tween the ETERNUS DX
and the socket
(IEC60320 C13 n NEMA
L6-15P)
FUJITSU Storage ETERNUS DX8100 S3/DX8700 S3/DX8900 S3 Hybrid Storage Systems Site Planning Guide
Socket type
Plug type
(Socket)
IEC60320 C14G IEC60320 C13
Socket type
Plug type
(Socket)
NEMA L6-15P NEMA L6-15R
39
Copyright 2020 FUJITSU LIMITED
Voltage rating/current
Cable length
rating
1.5m 250V 10A
Voltage rating/current
Cable length
rating
4.0m Rating: 250V 10A
(Normal usage rating:
8A)
P3AM-9422-13ENZ0