Specifications For Optional Power Supply Products; Table 6 Specifications For Ac200V Power Cords (For The Emeia, Central American, And Caribbean Regions); Table 7 Specifications For Ac200V Power Cords; Bean Regions) - Fujitsu ETERNUS AF250 S2 Site Planning Manual

1. ETERNUS AF Installation
Outlet/Socket Specifications

Specifications for Optional Power Supply Products

This section explains the specifications of optional power cords and power related optional products.
For power distribution units, the number of outlets that are required to connect the controller enclosure and
drive enclosures should be taken into consideration, and the most appropriate power distribution units should
then be selected.
When an existing power socket is used, make sure that the plug type of the power distribution unit fits the exist-
ing power socket and that the power supply facility is able to provide sufficient power to the system. If the plug
type does not fit the power socket, electrical work to change the power socket is required. This electrical work
must be performed in compliance with the electrical codes of the nation, the municipality, or the region.
■
AC200V Power Cords (for the EMEIA, Central American, and Caribbean Regions)
AC200V power cords are used to connect devices to the IEC60320 C13 power socket type. These power cords can
be used if the specifications of the connection device allow AC200V.

Table 6 Specifications for AC200V Power Cords (for the EMEIA, Central American, and Caribbean Regions)

Usage
Used for connection be-
tween the ETERNUS AF
and the socket
(IEC60320 C13 n
IEC60320 C14G)
■
AC200V Power Cords (for Regions other than the EMEIA, Central American, and Caribbean
Regions)
AC200V power cords are used to connect devices to the NEMA L6-15R power socket type. These power cords can
be used if the specifications of the connection device allow AC200V.
Table 7 Specifications for AC200V Power Cords (for Regions other than the EMEIA, Central American, and Carib-

bean Regions)

Usage
Used for connection be-
tween the ETERNUS AF
and the socket
(IEC60320 C13 n NEMA
L6-15P)
Socket type
Plug type
(Socket)
IEC60320 C14G IEC60320 C13
Socket type
Plug type
(Socket)
NEMA L6-15P NEMA L6-15R
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Site Planning Guide
Copyright 2021 FUJITSU LIMITED
Cable length
1.5m
Cable length
4.0m
18
Voltage rating/current
rating
250V 10A
Voltage rating/current
rating
Rating: 250V 10A
(Normal usage rating:
8A)
P3AG-1812-06ENZ0