Download  Print this page

Advertisement

TIMER
Use it to set an automatic switch-off time
for a cooking zone.
1.
Set the cooking zone. Touch
and again until the indicator for the
necessary cooking zone comes on.
You must set the cooking zone
before you activate the timer.
2.
Set the heat setting for the cooking
zone. You can also set it after you ac-
tivate the timer.
3.
To activate the timer or change the
set time, touch + or - on the hob con-
trol panel. The maximum time you
can set is 99 minutes.
The indicator of the cooking zone
flashes slowly. The timer starts to
count down.
4.
To see the remaining time, touch
again and again until the indicator for
the necessary cooking zone flashes
quickly. The display shows the re-
maining time.
When the set time ends, 00 flashes
and an acoustic signal sounds. The
cooking zone deactivates.
5.
Touch
to stop the signal.
To deactivate the timer before the
set time is completed, set the
cooking zone with
The remaining time counts down
to 00. The indicator of the cook-
ing zone goes out.
You can use the timer as a Minute Minder
when the cooking zones do not operate.
To do this, set the cooking zone and acti-
vate the timer but do not set the heat set-
ting.
STOP AND GO
The Stop and Go
cooking zones that operate to the lowest
heat setting (
This function does not deactivate the tim-
er function.
• To activate this function, touch
display shows the symbol
• To deactivate this function, touch
The display shows the heat setting that
you set before.
again
LOCK
When the cooking zones operate, you can
lock the control panel but not
vents an accidental change of the heat
setting.
This function does not deactivate the tim-
er function.
1.
2.
3.
CHILD SAFETY DEVICE
This function prevents an accidental oper-
ation of the hob.
Activating the child safety device
1.
and touch -.
2.
3.
Deactivating the child safety device
1.
function sets all
).
When the Stop and Go function
operates, you cannot change the
heat settings.
Set the heat setting.
To activate this function, touch
The display shows the symbol
4 seconds.
To deactivate this function, touch
The display shows the heat setting
that you set before.
When you deactivate the appli-
ance, the function is deactivated.
Touch
to activate the hob. Do not
set the heat settings.
Touch
for 4 seconds. The display
shows the symbol
ty device operates.
Touch
to deactivate the hob.
Touch
to activate the hob. Do not
set the heat settings.
ENGLISH
11
. The
.
.
. It pre-
.
for
.
. The child safe-

Advertisement

Chapters

Comments to this Manuals

Symbols: 0
Latest comments: