DEACTIVATING THE HOB
activate the hob.
Touch the necessary heat setting on the
control bar. Change to the left or right, if
necessary. Do not release before you
have the correct heat setting. The display
shows the heat setting.
The automatic heat-up function lets you
get the necessary heat setting in a shorter
time. It sets the highest heat setting for
some time (refer to the diagram), and
then decreases it to the necessary heat
To start the automatic heat-up:
Immediately set the necessary heat
setting. After 3 seconds
in the display.
To deactivate the function, change
the heat setting.
There is a malfunction.
OptiHeat Control (three-step residual heat indicator):
continue cooking/keep warm/residual heat.
The lock/child safety function is on.
The cookware is unsuitable or too small, or there is no
cookware on the cooking zone.
The automatic switch-off is on.
for 1 second to activate or de-
comes on in the dis-
The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 10 mi-
nutes at most. After that, the induction
cooking zone automatically changes back
to the highest heat setting. To activate,
deactivate, touch a heat setting
The power management divides the pow-
er between two cooking zones in a pair
(see the illustration). The Power function
increases the power to the maximum level
for one cooking zone in the pair and de-
creases the power in the second cooking
zone. The display for the reduced zone
changes between two levels.
2 3 4 5 6 7 8 9 10 11 12 13 14
comes on in the display. To