Bypass Feed Copying - Ricoh A151 Operating Instructions Manual

Bypass Feed Copying

Bypass Feed Copying
Use the bypass feed entrance to copy onto paper of a different size than the
one already in the paper tray.
F
One sheet should be inserted into the bypass feed entrance at a time.
F
Bypass feed copying also may be used for OHP transparencies, adhesive labels, trans-
lucent paper, or post cards.
F
Regarding the bypass feed copying with the optional document feeder, see page 23
F
Do not insert the copy paper into the bypass feed entrance before turning on the main
switch. If you do, J1 and
feed entrance, then reinsert it.
will light. In this case, take out the paper from the bypass
1. Place the original face down on the
exposure glass, and lower the platen
cover.
F
The original should be centered ac-
cording to the size marks on the left
scale.
2. Slide the bypass feed guides to the
proper width.
F
Pull out the extender to support copy
paper larger than A4, 8
3. Insert the copy paper into the by-
pass feed entrance.
F
Whenever an OHP transparency is de-
livered to the copy tray, it should be
taken out right away. Place the OHP
transparency on a flat surface.
4. After the Start key turns green, in-
sert the next copy paper into the
bypass feed entrance.
5. Repeat step 4 until your copying is
completed.
COPYING
" x 11".
1/2
11