Windows Ce 5.0-Based Client - HP BladeSystem bc2000 - Blade PC Administrator's Manual

Customization Steps
(Recommended)
1. Start up the HP SAM client.
2. Type the HP SAM Web server name.
3. Click the Options button.
4. Change appropriate connection settings.
5. Click the Save Settings button.
6. Place the config file (hprdc.sam) on the desktop.
7. Click Save.
You are now able to double-click the HP SAM icon to start the client.
NOTE: You can set additional settings by manually editing the .SAM file. Refer to
Settings on page 34

Windows CE 5.0-Based Client

To install the client on a Windows CE 5.0-based thin client:
1. Log in to the thin client under an account with local administrative rights and run the scwce-en
##.cab file (## is the software version).
2. Follow the installation wizard to install.
3. After installation, click Start > Programs > HP PC Session Allocation Client to run the client.
Customization Steps
(Recommended)
1. Run the client.
2. Type the HP SAM server name.
3. Click the Options button.
4. Change connection settings, if needed.
5. Click the Save Settings button.
6. Select Desktop from the Save in list.
7. Click Save.
You are now able to start the client from the desktop.
NOTE: You can set additional settings by manually editing the .SAM file. Refer to
Settings on page 34
for a list of the options available for the Windows XPe-based client.
for a list of the options available for the Windows CE-based client.
Install and Validate the HP SAM Client Software
Configuration
Configuration
33