Identifying A Blade Pc Using The Unit Identification Led - HP Bc1500 - BladeSystem - Blade PC User Manual

When the blade PC power is off, the Power Off button text becomes Power On.
To reboot the blade PC using the CLI, type:
REBOOT BAY <bay number> {[ , | - ] <bay number>} {FORCE} {[PXE | HDD | RBSU]}
✎
This command sends a request to the blade PC in a given bay to perform a graceful shutdown and
then reboots the blade PC.
To power off the blade PC (immediately or otherwise) using the CLI, type:
POWEROFF BAY <bay number> {[ , | - ] <bay number>} {FORCE}
✎
If the FORCE argument is invoked, the blade PC powers down immediately and could lose data
or become unstable.

Identifying a Blade PC Using the Unit Identification LED

✎
You can perform this task only for a given blade PC bay by enclosure administrators and group
administrators with access rights to the blade PC bay.
The virtual button for the Unit Identification LED of the blade PC physically changes the state of
the Unit Identification LED on the front panel of the blade PC from off to on, or vice-versa. The
Unit Identification LED illuminates bright blue and is designed to help a technician quickly
identify a specific blade PC in the data center.
To change the state of a Unit Identification LED of for a blade PC using the Web-based user
interface:
1. Click the Bays tab.
2. Click Bay List in the left panel.
3. Click the blade PC whose Unit Identification LED you wish to toggle.
4. Click Virtual Buttons at the bottom of the screen.
5. Click Toggle ON or Toggle OFF depending on the current state of the Unit Identification
LED for the blade PC.
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide
Performing Common Administrative Tasks
7-5