Component Installation & Replacement; Installing Or Replacing The Rtm Isdn 1500 Card; Realpresence Collaboration Server (Rmx) 1500; Removing The Blank Cover Or The Existing Rtm Isdn 1500 Card From The Realpresence Collaboration Server (Rmx) 1500 - Polycom RMX 1500 Hardware Manual

Component Installation &
Replacement
On the RealPresence Collaboration Server (RMX) 1500 you can install or replace the RTM
ISDN 1500 card.
Only the RTM ISDN is replaceable. The RTM-IP 1500 and Power Supply are not field replaceable.
Before installing or replacing the RTM ISDN:
•
•
Warning!
•
•
•

Installing or Replacing the RTM ISDN 1500 Card

Prior to adding the RTM ISDN 1500 card you must have your ISDN product license
available. For more information see, RealPresence® Collaboration Server 1500/2000/4000
Getting Started Guide, "Procedure 2: Product Registration" on page 2-28.
Removing the Blank Cover or the Existing RTM ISDN 1500 Card from the

RealPresence Collaboration Server (RMX) 1500

1
2
3
Polycom, Inc.
Make sure you have the correct replacement part on hand.
Make sure you are using proper ESD equipment, to prevent damage to the system.
All maintenance tasks are to be performed by qualified, authorized personnel.
Use only replacement parts supplied by your dealer.
Follow all procedures. Do not skip any steps.
Ensure that the power switch on the RMX is turned OFF (O).
Remove the cover by unscrewing the captive screws that fasten the card to the MCU.
Slide out the cover.
2
2-1