Display Mode Configuration - YASKAWA VS-626M5 Instruction Manual

5.2 Display Mode Configuration

The following figure shows the displays of the Digital Operator. Whenever the DSPL (display selection) key
is pressed, the display mode will change.
"88888" will be display if the model is the M5N for NC systems until communications with
*
the NC machine are established.
Fig 5.4
Control power ON
All LEDs light (for 1.5 s).
PROM version No. is displayed (for 0.5 s).
U1-01 (motor speed) data is displayed.
The operating status is displayed.
Uj-jj
The control constants are displayed.
Cj-jj
Alarm is ON.
The alarm log is displayed.
jALjj
Display Order of Digital Operator
5 -5
5.2 Display Mode Configuration
*
C1-37 (bits 1 and 0) turned ON.
The Digital Operator operation
d1-jj
reference is displayed.
The alarm number is displayed.
AL-jj
Alarm is ON.
5