Busbar And Cable Kits For Connecting Units - YASKAWA VS-626M5 Instruction Manual

14.3.4 Busbar and Cable Kits for Connecting Units

Busbar and Cables are required for connections between the Converter and Inverter. Select suitable Busbar
and Cable Kit from the tables below depending on the combination of Converter and Inverter. Busbar and
Cable Kit are not supplied with the Inverter, but must be purchased separately when needed.
D Always turn OFF the input power supply before wiring terminals.
Otherwise, an electric shock or fire can occur.
D When mounting the Busbar, use only the screws supplied.
Otherwise, mounting may be incorrect.
Selecting Busbar and Cable Kits
J
Refer to the following table when selecting Busbar and Cable Kits
Table 14.21
CIMR-MR5
* A: For stand-alone drive system N: for NC system
WARNING
CAUTION
200 V Class
Unit Combination
Converters CIMR-M5
:
23P7 23P7
25P5
27P5
2011 2011
2015 2015
2018
2022
2030 2030
2307
14 -49
14.3 Options and Peripheral Units
Busbar/Cable Kits Code Number
Inverters
:
23P7 72626-W100100
25P5
27P5
2011 72626-W100150
2015
2018
2022
2030
72626-W100200
2037
72626-W100300
23P7 72626-W150100
25P5
27P5
2011 72626-W150150
2015
2018
2022
2030 72626-W150200
2037 72626-W150300
23P7 72626-W300100
25P5
27P5
2011 72626-W300150
2015
2018
2022
2030 72626-W300200
2037 72626-W300300
14