Hot-Plug Backplane - Gateway 7210 System Manual

Hot-plug backplane

Back of the hot-plug backplane board
Power connector
SCSI connector
JP5: Delay start jumper controls the spin-up sequence of the drives attached
to the backplane. If you enable delay start, the drives spin up one at a time
in order of their SCSI ID. If you disable delay start, all drives spin up
simultaneously. Set the jumper according to the table below.
JP5: Delay start jumper
JP6: Termination jumper
Position Description
On (default) Enables delay start
Off Disables delay start
Hot-plug backplane
11