Mpm/Mpm+ And Mpmx Media Cards - Polycom Collaboration Server (RMX) 2000 Hardware Manual

MPM/MPM+ and MPMx Media Cards

The RMX unit can work with either MPM or MPM+/MPMx (but not with both
simultaneously) media cards. The card type installed in the system determines the Card
Configuration Mode.
MPM cards are not supported with version 7.1 and later.
MPM+ cards are supported only with D-type chassis and software version 4.x and later.
MPMx cards are supported only with D-type chassis and software version 7.x.
For more details about the chassis type, see "RMX Chassis Types" on page 1-28.
ISDN support is the same for all card types.
Table 1-8 summarizes the resource capacities of the various resolutions per card type in CP
Conferencing Mode.
Table 1-8
Resource Type
HD720p60/HD1080p30 Symmetric
HD720p60/HD1080p30
Asymmetric
HD720p30
SD
CIF (H.264)
CIF (H.263)
Audio only (VoIP)
Table 1-9 summarizes the resource capacities per line rate per card type in VSW
Conferencing Mode.
Table 1-9
Resource Type
VSW 2Mbps
VSW 4Mbps
VSW 6Mbps
Audio only (VoIP)
Polycom, Inc.
MPMx, MPM+ and MPM Resource Capacity per Resolution in CP
MPMx, MPM+ and MPM Resource Capacity per Line Rate in VSW
Maximum Possible Resources Per Card
MPM MPM+
Not
Applicable
Not
Applicable
10
10 20
10 30
40 80
40 80
200 400
Maximum Possible Resources Per Card
MPM MPM+
40 80
20 40
- 20
200 400
Chapter 1-Hardware Description
MPMx
15
15
30
60
90
60
360
MPMx
80
40
20
360
1-19