Polycom Collaboration Server (RMX) 2000 Hardware Manual page 22

RealPresence Collaboration Server (RMX) 2000 Hardware Guide
Table 1-6
Component
Multi Processor Module
(MPM) Card
Multi Processor Module+
(MPM+) Card
Multi Processor Modulex
(MPMx) Card
1-14
RMX 2000 Component Description (Continued)
Description
The MPM cards perform the various RTP, audio and video processing
functions on the RMX 2000. MPM cards are based on the ATCA
standard, with a card manager (CM) and up to 26 720MHz TI DSP's.
Two types are available:
•
MPM - F - 26 DSP's
•
MPM - H - 13 DSP's
Note: This card is not supported with version 7.1 or later.
The MPM+ cards, perform the various RTP, audio and video
processing functions on the RMX 2000 unit. TI C6455 processors are
at the core of each MPM+ card which are available in the following
assemblies:
•
MPM+20 (20 CIF resources)
•
MPM+40 (40 CIF resources)
•
MPM+80 (80 CIF resources)
Notes:
•
The MPM+ card(s) can only work with software version 4.0 or
later. Ensure that software appropriate to the MCU hardware
configuration is installed in the MCU.
•
The MPM+ card can work only with a new environmentally
friendly D-type chassis and is disabled when inserted in a C-type
chassis.
The MPMx cards, perform the various RTP, audio and video
processing functions on the RMX 2000 unit. TI processors are at the
core of each MPMx card which are available in the following
assemblies:
•
MPMx -S
•
MPMx -D
Notes:
•
The MPMx card(s) can only work with software version 7.0 or
later. Ensure that software appropriate to the MCU hardware
configuration is installed in the MCU.
•
The MPMx card can work only with a new environmentally friendly
D-type chassis and is disabled when inserted in a C-type chassis.
Polycom, Inc.