Cables Connected To The Rtm Ip, Rtm Lan And Rtm Isdn Cards - Polycom Collaboration Server (RMX) 2000 Hardware Manual

RealPresence Collaboration Server (RMX) 2000 Hardware Guide

Cables Connected to the RTM IP, RTM LAN and RTM ISDN Cards

All external connectors are located on the rear panel.
To connect the cables:
•
•
•
Figure 1-10
Do not remove the protective caps from LAN1*, LAN 3 and ShMG ports on the RTM IP card.
1-18
Required. RTM-IP 2000:
— Connect the LAN cable to LAN 2.
— Optional. Connect the additional LAN cable to LAN 1. This port is also available
for Media Redundancy. For more information, see Polycom® RealPresence®
Collaboration Server 1500, 2000, 4000 , "LAN Redundancy" on page
"Multiple Network Services" on page 16-53.
Optional. For each installed RTM LAN - Connect the LAN cable to LAN 2.
— Optional. Connect the LAN cable to LAN 1. With Multiple networks and LAN
redundancy configurations, ports LAN 1 and LAN 2 can be used. For more
information, see Polycom® RealPresence® Collaboration Server 1500, 2000, 4000 ,
"LAN Redundancy" on page
Optional. For each installed RTM ISDN:
— Connect the E1/T1 cables to their PRI Ports.
— Connect the LAN cable to LAN 1.
E1/T1 Connection
LAN 2 Connection
RMX 2000 Rear Panel View with Cables
16-37 "Multiple Network Services" on page 16-53.
and
LAN 2 Connection, (optional) LAN
Off/On
switch
16-37
and
Power
Cable
Polycom, Inc.