Socket Port Setting - Toshiba B-SX6T SERIES System Mode Manual

2. SYSTEM MODE

2.7.2 Socket Port Setting

To set a socket port number, follow the procedure below.
SOCKET PORT
[PAUSE]
PORT OFF -----
2.7.3 DHCP and DHCP Client ID Setting
To set the DHCP and the DHCP client ID, follow the procedure below.
<7>IP ADDRESS
DHCP
[PAUSE]
<7>IP ADDRESS
DHCP OFF
[RESTART] or [FEED]
PORT ON 08000
[PAUSE]
PORT ON 08000
Enter a number for each digit of the port number
with the [RESTART] or [FEED] key.
PORT ON 08000
[PAUSE]
PORT ON 08000
[PAUSE]
<7>IP ADDRESS
DHCP
[RESTART] or [FEED]
<7>IP ADDRESS
DHCP ON
[PAUSE]
<7>IP ADDRESS
DHCP CLIENT ID
[PAUSE]
MODE ASCII
DHCP CLIENT ID
[PAUSE]
ASCII Code
MODE
ABCDEFGHIJKLMNOP
Enter a character or a value for each of 1st byte to 16th byte
sequentially using the [FEED] or [RESTART] key.
[PAUSE]
Enter the 5th digit of the port number with the
[RESTART] or [FEED] key.
[PAUSE] key allows the 4th digit setting.
Repeat this procedure until the 1st digit setting
has been completed.
[FEED] or [RESTART]
MODE
ASCII 4142434445464748
494A4B4C4D4E4F50
2-68
EO13-33002
2.7 IP Address Setting
Pressing the
HEX
DHCP
[PAUSE] Hex. Code
[PAUSE]