Job Control; Printing Using The E-Mail Port Monitor - Toshiba GA-1120 Printing Manual

7
7-4 Using Fiery E-mail Service

Job Control

You can manage personal jobs when printing by submitting commands to the
GA-1120 via e-mail. You can cancel a job, check job status, and request help on a job.
Once you send a command, the GA-1120 returns an e-mail response.
T
O MANAGE PRINT JOBS WITH
1. In your e-mail application, enter the GA-1120 e-mail address in the To: line.
2. Enter one of the following Job Control commands in the Subject line.
To check the status of a job, enter #JobStatus<job id> in the Subject line.
You will receive a reply to your job status query. You can only inquire about the status
of the job if you sent the job or are an administrator.
To cancel a job, enter #CancelJob<job id> in the Subject line.
You will receive a notification indicating that the job has been cancelled and will not
print to the GA-1120. You can only cancel the job if you sent the job or are an
administrator.
To inquire help, enter #Help in the Subject line.
You will by sent an e-mail response that contains the links that allow you to cancel
jobs, check job status, and search and manage address books. Click any of the links to
perform a Job Control command.

Printing using the E-mail Port Monitor

Once you set up the E-mail Port Monitor, you are able to print using E-mail Service in
the same manner as any other printing method. No additional steps are necessary.
The E-mail Port Monitor is only supported on Windows OS.
N :
OTE
The Direct connection is not supported when printing with E-mail
N :
OTE
Port Monitor.
J C
OB ONTROL