Toshiba B-SX6T SERIES System Mode Manual page 128

5.RFID ANALYZE TOOL
4. When the "CommSetting" screen appears, perform the serial port or LAN setting in accordance with the
settings of the B-SX6T/SX8T printer.
Baudrate: 2400, 4800, 9600, 19200, 38400, 115200
Parity: NONE, EVEN, ODD
Flow control:
NOTES:
1. Choose the port to which the printer is connected.
2. Choose "NON" for the Flow control of the RFID Analyze Tool. However, any flow control code of the
printer is acceptable.
3. The data bit for the Analyze Tool is fixed to 8. Make sure that the data length for the printer is set to 8
bits.
4. The command flame for the Analyze Tool is "{ | }". Make sure that the control code for the printer is set
to "AUTO" or "{ | }".
5. When the printer and the PC are connected via LAN, a printer IP address and socket port number need
to be entered.
Default Printer IP Address: 192.168.10.20, Socket Port No.: 8000
Port: COM1 to COM9
Data bit: 8 bit
Stop bit: 1, 2
NON, XON, XON/XOFF,
RTS/CTS+XON/XOFF
Printer IP Address
Socket Port No.
5- 15
EO13-33002
(Revision Date: Jul. 24, 2008)
5.4 Operatin Procedure