Toshiba B-SX6T SERIES System Mode Manual page 113

4. PROGRAM DOWN LOAD
8. While the printer is preparing for the downloading, part of the screen may be disordered. After
approximately 15 seconds, the following screen will appear causing the firmware to be transferred.
9. After the firmware has been transferred to the printer successfully, the display returns to the main menu
screen.
10. After data has been written into the Flash ROM successfully, the message
"*** COMPLETE ***" appears on the LCD display. And then the printer will
restart automatically.
NOTE: If the printer does not restart and keeps on displaying the message "***
COMPLETE ***", wrong firmware may have been downloaded. Confirm
the model of the firmware, and then download a proper one to the
printer again.
11. Click on the END button to terminate the download program.
4- 7
EO13-33002
4.3 Firmware Download
DOWNLOAD MODE
*** COMPLETE ***
ON LINE
B-SX8T Vx.xx