Toshiba B-SX6T SERIES System Mode Manual page 16

2. SYSTEM MODE
Item #
BASIC (61) BASIC interpreter setting
BASIC TRACE (62) BASIC interpreter trace setting
DHCP (63) DHCP function setting
DHCP ID (64) DHCP ID setting
DHCP HOST NAME (65) DHCP host name
RTC BATT. CHK (66) RTC Low Battery Check setting
RTC RENEWAL (67) RTC data renewal timing
RFID MODULE (68) RFID module type
RFID TAG TYPE (69) RFID tag type
RFID ERR CHECK (70) RFID error tag detection
RFID RETRY (71) Maximum number of RFID issue retries
RFID RD CYCLE (72) Maximum number of RFID read retries
RFID WT CYCLE (73) Maximum number of RFID write retries
RFID ADJ RETRY (74) RFID adjustment for retry
RFID POWER LEV (75) RFID wireless power level setting
RFID AGC THR. (76) RFID AGC Threshold Setting
RFID Q VAL (77) RFID Q VAL (Q value)
RFID WT AGC (78) RFID WT AGC (AGC threshold for data write)
RFID WT AGC MIN (79) RFID WT MIN AGC (AGC threshold lower limit for retry)
Description
RFID read retry time-out
RFID write retry time-out
ON: Available
OFF: Unavailable
ON: Available
OFF: Unavailable
ON: Available
OFF: Unavailable
Max. 16 characters
Max. 16 characters
ON: Available
OFF: Unavailable
BATCH: per batch
PAGE:
NONE: No RFID kit is installed.
U2: U2 B-SX708-RFID-U2-EU-R,
NONE: 11
EPC C1 Gen2: 24
ON:
OFF: An error tag detection is not
0 to 255
0 to 255
0 sec. to 9.9 sec.
0 to 255
0 sec. to 9.9 sec.
-99 mm to +99 mm
9 to 18
0 to 15
0 to 5
0 to 15
0 to 15
2- 10
EO13-33002
(Revision Date: Mar. 26, 2009)
2.1 Self-diagnostic Test
Specification
per page
B-SX708-RFID-U2-CN-R
An error tag detection is performed.
performed.