Toshiba B-SX6T SERIES System Mode Manual page 106

3. ON LINE MODE
3. The factory setting for the low battery check function is OFF.
4. To enable the real time clock function, set the low battery check to ON.
5. When the low battery check is set to OFF, the RTC function is available even in a low battery state. However,
the setting and check of the real time clock is required whenever the power is turned on.
6. When the RTC data renewal timing is set to "PAGE", the printer stops between labels ignoring the on-the-fly
issue even when an Issue command is sent to print more than one label.
3-14
EO13-33002
3.7 Real Time Clock (RTC) Setting