Print Tone Fine Adjustment (Thermal Transfer/Thermal Direct Print) - Toshiba B-SX6T SERIES System Mode Manual

2. SYSTEM MODE

2.3.5 Print Tone Fine Adjustment (Thermal Transfer/Thermal Direct Print)

This parameter is to fine adjust the Print Tone.
When "<3>ADJUST SET" appears, press the [PAUSE] key until the following display appears.
<3>ADJUST SET
TONE ADJ.<T> +0
To fine adjust the print tone for thermal direct printing, press the [PAUSE] key again.
<3>ADJUST SET
TONE ADJ.<D> +0
When the LCD display shows "TONE ADJ.<T>" or "TONE ADJ.<D>", select a desired value with the
[FEED] or [RESTART] key. (Range: -10 to +10)
[RESTART]
[FEED]
[FEED] key:
[RESTART] key: Pressing the [RESTART] key one time causes a +1 tone change, up to +10 tones.
After completing the fine adjustment, press the [PAUSE] key.
NOTES: 1. The fine adjustment value equals to the sum of the fine adjustment values set by the PC command
and this parameter. The maximum print tone fine adjustment value is +10. The following table
shows the maximum fine adjustment value for each print speed. Even if the set value exceeds the
maximum value, it will be automatically corrected to the following value.
Maximum fine adjustment value
Print speed
2. This is useful when print tone is required to be fine adjusted.
e.g.) When the ribbon is changed to different type.
Print Tone for thermal transfer printing
Print tone for thermal direct printing
Thermal Transfer Print
TONE ADJ<T>. +10
TONE ADJ<T>. +9
TONE ADJ<T>. +0
TONE ADJ<T>. -9
TONE ADJ<T>. -10
Pressing the [FEED] key one time causes a –1 tone change, up to –10 tones.
Thermal direct
3 ips +10 step
4 ips +5 step
8 ips +2 step
Darker
Standard
Lighter
B-SX6T
Thermal transfer Thermal direct
+10 step
+5 step
+2 step
2-44
2.3 Printer Parameter Fine Adjustment
Thermal Direct Print
TONE ADJ<D>. +10
TONE ADJ<D>. +9
TONE ADJ<D>. +0
TONE ADJ<D>. -9
TONE ADJ<D>. -10
B-SX8T
Thermal transfer
+10 step +10 step
+5 step +5 step
+2 step +2 step
EO13-33002