Auto Print - Toshiba B-SX6T SERIES System Mode Manual

2. SYSTEM MODE

2.4.9 Auto Print

AUTO PRINT(TRAN)
[FEED]
AUTO PRINT(REFL)
Pressing the [PAUSE] key while AUTO PRINT (TRAN) or AUTO PRINT (REFL) is displayed causes the
following automatic test print:
(1) [PAUSE] key
(2) [PAUSE] key
(3) [PAUSE] key
NOTES: 1. Select "AUTO PRINT (TRAN)" when using labels, and "AUTO PRINT (REFL)" when using tag
paper with black marks.
2. Auto print is performed on the conditions below. Parameter setting and print tone fine
adjustment value is ignored.
Print speed:
Sensor type:
Printing method:
Issuing mode:
Label size:
Print tone fine adjustment value:
Feed Gap Sensor is chosen.
[RESTART]
Black Mark Sensor is chosen.
Feeds one media and prints slant lines (3 dots) on 5 pieces of media
Prints bar codes on 5 pieces of media
Prints characters on 5 pieces of media
8 inches/second
Black mark or feed gap sensor
Thermal transfer
Batch printing
76mm
±
0
2-57
EO13-33002
2.4 Test Print