4. REPLACING THE IMPORTANT PARTS
4.11 Setting Up the Optional External Media Roll Hanger
1. Fix the External Media Roll Hanger on the rear of printer.
2.
Put the label roll onto the 3"-diameter Media Shaft.
3"-diameter
Media Shaft
3.
Place the Media Shaft onto the slots of the External Media Roll Hanger.
4.
Pull the label forward through rear paper inlet, label guide to paper outlet.
4.11 Setting Up the Optional External Media Roll Hanger
External Media Roll Hanger
Label Roll
4-15
EO18-33013
External Media
Roll Hanger