Sfp/Sfp+ Modules; Installing The Asa 5585-X Ips Ssp - Cisco IPS 7.1 Installation Manual

Chapter 9 Installing and Removing the ASA 5585-X IPS SSP

SFP/SFP+ Modules

The SFP/SFP+ module is a hot-swappable input/output device that plugs into the SFP/SFP+ ports and
provides Gigabit Ethernet connectivity. The SFP and SFP+ modules are optional and not included with
the ASA 5585-X IPS SSP. You can purchase them separately. For 1 Gb, you need SFP. For 10Gb, you
need SFP+. The interfaces are called TenGigabitEthernet 0/x whether they are 10 Gb-enabled or not.
Table 9-4
Table 9-4
1G SFP Module
GLC-SX-MM
GLC-SX-MMD
GLC-LH-SM
GLC-LH-SMD
GLC-T
10G SFP+ Module
SFP-10G-ER
SFP-10G-SR
SFP-10G-LRM
SFP-10G-LR
SFP-H10GB-ACU7M
SFP-H10GB-ACU10M
SFP-H10GB-CU1M
SFP-H10GB-CU3M
SFP-H10GB-CU5M

Installing the ASA 5585-X IPS SSP

The ASA 5585-X comes with a core SSP already installed (SSP-10, SSP-20, SSP-40, or SSP-60). You
can install an optional ASA 5585-X IPS SSP (IPS SSP-10, IPS SSP-20, IPS SSP-40, or IPS SSP-60).
The ASA 5585-X IPS SSP must be at the same level as the ASA 5585-X SSP model; for example, if you
Note
have the ASA 5585-X with SSP-10, you can only install the IPS SSP-10.
The ASA 5585-X IPS SSP will not run without the core SSP installed. You must install the
ASA 5585-X IPS SSP in the upper slot (slot 1) and the core SSP in the bottom slot (slot 0). You must
power off the ASA 5585-X to remove and install SSPs. The SSPs are not hot-swappable.
To install the ASA 5585-X IPS SSP in the ASA 5585-X for the first time, follow these steps:
Power off the ASA 5585-X.
Step 1
Remove the power cable from the ASA 5585-X.
Step 2
OL-24002-01
lists the SFP/SFP+ modules that the ASA 5585-X IPS SSP supports.
SFP/SFP+ Modules
1000 Base-SX SFP module
1000BASE-SX short wavelength, with DOM
1000 Base-LX/LH SFP module
1000BASE-LX/LH long-wavelength, with DOM
1000BASE-T standard
10G ER SFP+ module
10G SR SFP+ module
10G LRM SFP+ module
10G LR SFP+ module
10GBASE-CU SFP+ Cable 7 Meter, active
10GBASE-CU SFP+ Cable 10 Meter, active
10GBASE-CU SFP+ cable 1 meter, passive
10GBASE-CU SFP+ cable 3 meter, passive
10GBASE-CU SFP+ cable 5 meter, passive
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
SFP/SFP+ Modules
9-9