Contents; Installation Notes And Caveats - Cisco IPS 7.1 Installation Manual

Installing the IPS 4260

Contents

This chapter describes IPS 4260, and contains the following sections:
•
•
•
•
•
•
•
•
•
•
•
•

Installation Notes and Caveats

Pay attention to the following installation notes and caveats before installing the IPS 4260.
Read through the entire guide before beginning any of the installation procedures.
Note
Only trained and qualified personnel should install, replace, or service this equipment
Warning
Caution Read the safety warnings in the Regulatory Compliance and Safety Information for the Cisco Intrusion
Detection and Prevention System 4200 Series Appliance Sensor document and follow proper safety
procedures when performing the steps in this guide.
OL-24002-01
Installation Notes and Caveats, page 4-1
Product Overview, page 4-2
Supported Interface Cards, page 4-3
Hardware Bypass, page 4-4
Front and Back Panel Features, page 4-7
Specifications, page 4-9
Accessories, page 4-10
Rack Mounting, page 4-10
Installing the IPS 4260, page 4-16
Removing and Replacing the Chassis Cover, page 4-19
Installing and Removing Interface Cards, page 4-21
Installing and Removing the Power Supply, page 4-23
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
4
C H A P T E R
Statement 49
.
4-1