Cisco IPS 7.1 Installation Manual page 360

Troubleshooting the Appliance
-----------------------------------------------
sensor(config-log)#
Turn on debugging for a particular zone.
Step 13
sensor(config-log)# zone-control nac severity debug
sensor(config-log)# show settings
master-control
-----------------------------------------------
-----------------------------------------------
zone-control (min: 0, max: 999999999, current: 14)
-----------------------------------------------
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
E-48
zone-name: intfc
severity: warning <defaulted>
<protected entry>
zone-name: nac
severity: warning <defaulted>
<protected entry>
zone-name: sensorApp
severity: warning <defaulted>
<protected entry>
zone-name: tls
severity: warning <defaulted>
enable-debug: true default: false
individual-zone-control: true default: false
<protected entry>
zone-name: AuthenticationApp
severity: warning <defaulted>
<protected entry>
zone-name: Cid
severity: debug <defaulted>
<protected entry>
zone-name: Cli
severity: warning <defaulted>
<protected entry>
zone-name: IdapiCtlTrans
severity: warning <defaulted>
<protected entry>
zone-name: IdsEventStore
severity: error default: warning
<protected entry>
zone-name: MpInstaller
severity: warning <defaulted>
<protected entry>
zone-name: cmgr
severity: warning <defaulted>
<protected entry>
zone-name: cplane
severity: warning <defaulted>
<protected entry>
zone-name: csi
severity: warning <defaulted>
<protected entry>
zone-name: ctlTransSource
severity: warning <defaulted>
<protected entry>
zone-name: intfc
severity: warning <defaulted>
<protected entry>
zone-name: nac
severity: debug default: warning
<protected entry>
zone-name: sensorApp
severity: warning <defaulted>
Appendix E Troubleshooting
OL-24002-01